2012 Marklin, TRIX and LGB New Items

Here are the 2012 New Items from Marklin

Authorized Marklin Digital Dealer .

If you see something you like, email me: RJFtrains@aol.com

If you have an interest in any of the items listed below, let me know ASAP, even if they are scheduled for 3rd or 4th quarter delivery, and especially if the items are MHI , Limited , Export , or even car sets. These almost always sell out in the US and ordering early provides your best chance to get these.

Note: Prices indicated as "Pre-order Price" are valid only for orders placed before February 26, 2012. For orders after that date, the higher price (if shown) will prevail.
.
(E)	Export	Items generally only available for one year -- limited availability
(E1)	Export "special"	Items given priority to specific country - very limited availability Items with delivery dates of "n/a" cannot be ordered at this time
(EX)	MHI / Exclusive	Available only by subscription -- very limited availability
(L)	Limited production	One-year only runs; often sold out early in the year
The "fine print":
Not responsible for typographical errors or changes in price or features by Märklin. Prices and specifications subject to change without notice.
Please click here to read more about pricing.

07592 - Fully Automatic Railroad Grade Crossing
Pre-order price: $ 79.00
Goes with: 7593

Model: The railroad grade crossing comes with half gates. It is designed for K Track. 2 solenoid activated gates with 2 warning crossbucks and 2 red warning lights which come on when the gates go down. Contact track set: 3 straight tracks each 90 mm / 3-9/16". Dimensions for each base half 137 x 95 mm / 5-3/8"x 3-3/4".

Comment: The gates for the fully automatic railroad grade crossings descend the minute an oncoming train reaches the contact area, and do not go back up until the last car has left the contact area. The contact area can be extended to any length desired. Any straight or curved track can be used with K Track. With C Track an existing electrical connection on the track sections must be separated. On the M Track that is no longer available only the 5115, 5116, and 5145 contact tracks can be used.

07593 - Add-on Set for the 7592 Railroad Grade Crossing
Pre-order price: $ 25.00
Goes with: 7592

Model: This add-on set is for the 7592 railroad grade crossing. It is designed for K Track. This set is required for each additional parallel track. Contact track set: 3 straight tracks each 90 mm / 3-9/16". The road section can be adjusted for a spacing of 33 to 68 mm / 1-5/16" to 2-11/16" / track spacing of 64 to 99 mm/2-1/2" to 3-7/8".

60065 - 50 VA Switched Mode Power Pack, 120 Volts
Pre-order price: $ 75.00

Model: This switched mode power pack is for connections to and for powering the 60213-60215 Central Station and the 60174 Booster. The input is 120 volts / 60 Hertz and the output is 19 volts / 50 watts DC voltage. This is a tabletop switched mode power pack in a plastic housing and comes with authorization as a toy. The unit has tabs for mounting. Dimensions 116 x 72 x 65 mm / 4-9/16" x 2-7/8" x 2-9/16". Connections: 4-pin mini DIN high current plug. The 60065 switched mode power pack is designed for use indoors.

60200 - Connector Adapter for Switched Mode Power Packs
Pre-order price: $ 9.00

Model: This connector adapter is for connections from users such as lights to a switched mode power pack with a 4-pin mini DIN high current plug.

60801 - Sound Programmer
Pre-order price: $ 89.00

60940 - märklin SoundDecoder mSD Special

Pre-order price: $ 89.00
m„rklin SoundDecoder mSD Special

Model: This decoder is for converting Märklin locomotives that have a 21-pin connector and that are equipped with a decoder having unamplified outputs. The märklin SoundDecoder-Special supports the digital formats mfx, MM1, MM2, and DCC. Sound files for copying by means of the CS 60213-60215 are available at www.maerklin.de.

66365 - 30 VA Switched Mode Power Pack, 120 Volts
Pre-order price: $ 45.00

Model: This switched mode power pack is for connecting to and supplying power to the 60112/60113 Track Box. The input is 120 volts / 60 Hertz / the output 18 volts / 30 watts DC voltage. The switched mode power pack is authorized for use with toys and comes in a plastic housing. Dimensions 80 x 50 x 75 mm / 3-3/16" x 2" x 3". Connections: Hollow socket 5.5/2.5 mm, positive conductor inside. The 66365 switched mode power pack is designed for use in dry areas.

72200 - "Station Platform" Building Kit
Pre-order price: $ 9.00
Goes with: 29201 29202 29203 29204 29210

Model: This snap-together building kit is made of sturdy plastic. The station platform can be assembled from a few parts, is easy as child's play to put together, and is therefore suitable for children ages 3 and above. A sheet of adhesive stickers with different names of cities as well as blank stickers are included. Instructions for assembly are included.

Highlights:

A building kit consisting of a few snap-together parts
Ideal for children ages 3 and above.

This station platform is the ideal add-on for the battery-operated trains, item nos. 29200, 29201, 29202, 29203, 29204, and 29210.

72201 - Battery-Operated Signal
Pre-order price: $ 9.00
Goes with: 29201 29202 29203 29204 29210

Model: This battery-operated signal made of sturdy plastic is just right for children. It has a green and a red LED that light up. This color light signal can be switched between the green and red LED lights either by pressing a button or it takes place automatically after 7 seconds. The battery holder is built into the base of the signal. 2 AAA batteries are included with the signal. The signal stands approximately 12 cm / 4-3/4" high. Since this signal is a toy for children ages 3 and above, is has no influence over the running of trains on the layout!

Highlights:

Automatic switching function provides all kinds of fun.
The color light signal can also be switched by pressing a button.
Batteries included with the signal.

This battery-operated signal is the ideal add-on for the battery-operated trains, item nos. 29200, 29201, 29202, 29203, 29204, and 29210.

72250 - Load Set
Pre-order price: $ 5.00
Goes with: 44100 44101 44103 44104

Model: The load set consists of barrels, packages, and sacks. All of the parts are made of plastic.

This load set is the ideal add-on for the 29210 "Freight Train" starter set, as well as for the cars with magnet couplers (item nos. 44100, 44101, 44103, and 44104).

72941 - Remote Control Transfer Table
Pre-order price: $ 235.00

Model: This transfer table comes in a new, realistic color scheme. The base plate has 2 approach tracks and 8 stall tracks. The track connections are for M Track. The transfer table can also be used with C Track and K Track in conjunction with adapter tracks. The deck has a motor in the operator's shed for forward and reverse operation. A control box and cable for remote control are included. The deck stops automatically at the tracks. Track power to the stall tracks comes through the deck. There are additional connections for catenary. Dimensions of the base 360 x 420 mm / 14-3/16" x 16-1/2". Deck length 288 mm / 11-3/8".

The transfer table can also be controlled with Märklin Digital using a k 84 decoder. The connections for the transfer table are described in the instructions for the k 84 decoder.

74041 - FCC Interference Suppression Set, 2 Amps (Required only in the USA)

Pre-order price: $ 15.00

Model: This set is for preventing interference with radio/television/cell phone reception. The set consists of a circuit board with spade connectors for C Track and red and brown hookup wires. One set is required for each conventional and digital power circuit. The set is designed for a maximum 2 amps user current. Recommended for the Mobile Station and for analog train controllers.

The FCC interference suppression set is required only in the USA!

74044 - FCC Interference Suppression Set, 5 Amps (Required only in the USA)

Pre-order price: $ 19.00

Model: This set is for preventing interference with radio/television/cell phone reception. The set consists of a circuit board with set-screw clips. One set is required for each conventional and digital power circuit. The set is designed for a maximum 5 amps user current. Recommended for the Central Station and for analog train controllers with up to 5 amps output current.

The FCC interference suppression set is required only in the USA!

74461 - Digital Decoder (C Track turnouts)

Pre-order price: $ 25.00

Model: This decoder can be installed in all C Track turnouts with electric mechanisms. It can be used with the digital formats Motorola and DCC. Connections are made with plug-in contacts, for Märklin and Trix C Track turnouts. An address can be set with coding switches (Motorola Format 1 to 320 / DCC Format 1 to 511), and can also be set on the programming track. Turnout lanterns can be connected and can be controlled (soldering skills required). A digital decoder can be installed at the same time as the electric turnout mechanism or can be installed later. The decoder is easily connected with plug-in contacts and can have a custom address set for each turnout. The digital power supply for the decoder can be taken directly from the track current contacts on the turnout. This means you can have a complete digital turnout that can also be used on temporary layouts.

Note: The 74465 digital decoder is used with the 24630 three-way turnout with 2 of the 74490 electric mechanisms.

74465 - Digital Installation Decoder (for 24630)

Pre-order price: $ 35.00

Model: This decoder can be installed in the C Track three-way turnout (24630) with electric mechanisms. It can be used with the digital formats Motorola and DCC. Connections are made with plug-in contacts, for Märklin and Trix C Track turnouts. An address can be set with coding switches (Motorola Format 1 to 320 / DCC Format 1 to 511), and can also be set on the programming track. Turnout lanterns can be connected and can be controlled (soldering skills required). A digital decoder can be installed at the same time as the electric turnout mechanism or can be installed later. The decoder is easily connected with plug-in contacts and can have a custom address set for each turnout. The digital power supply for the decoder can be taken directly from the track current contacts on the turnout. This means you can have a complete digital turnout that can also be used on temporary layouts.

75491 - Electric Turnout Mechanism
Pre-order price: $ 19.00

Model: This is an improved version of the 7549 turnout mechanism. This mechanism can be used with the 2265 and 2266 turnouts (new versions), the 22715 and 22716 turnouts, the 2275 double slip switch, and the KOMBI extension set program. The mechanism has an automatic end shutoff feature. Automatic feedback is possible with the 72710 control box. Below-baseboard mounting can be done with the 7548 installation kit.

78071 - Railroad Grade Crossing Track Extension Set
Pre-order price: $ 119.00

Prototype: Modern railroad grade crossing and station track layout with a storage siding.

Model: The set has a railroad grade crossing with 2 electro-magnetically activated half gates and 2 red warning lights per side of the track. Simple installation with wiring already completed. Contents: Track with street grade crossing 2 contact tracks each 94.2 mm / 3-11/16". 6 no. 24172 straight track, 1 no. 24077 straight track, 2 no. 24612 right turnout, 1 no. 24611 left turnout, 3 no. 24224 curved track, and 1 no. 24977 track bumper.

Highlights:

A lot of track for a passing siding, a storage siding, and a grade crossing.
Automatic railroad grade crossing, easy to install.

Extension set, ideal in combination with the current starter sets from the Märklin my world program and the Märklin H0 assortment. Can also be used as you desire.

78478 - Regional Express Track Extension Set

Pre-order price: $ 79.00
Goes with: 29478

Prototype: 1 German Railroad, Inc. (DB AG) type DBbzfa 761 bi-level cab control car, 2nd class.

Model: This is an add-on to the Regional Express and includes a bi-level cab control car and a model of a "RegioBus" bus. The cab control car has tinted side windows and dual red marker lights at the end of the car with the engineer's cab. Contents: 5 no. 24188 straight track, 4 no. 24172 straight track, 1 no. 24224 curved track, 1 right turnout, and 1 no. 24977 track bumper. 1 model of a bus. Length over the buffers 27.3 cm / 10-3/4".

Highlights:

Lots of play possibilities with the realistic linking of rail & road traffic.
Track for expanding a C Track layout.

Extension set that goes well with the 29478 "Regional Express" starter set.